Chloramination and nutrient monitoring


Rev. 5/03

Statement of the Problem

Chlorine is the most widely used disinfectant today, however, the release of chlorinated water into sensitive waterways can be detrimental to aquatic life. Regulations have mandated that the chlorine be removed prior to discharge into a receiving waterway. Most dechlorination processes use a reducing agent such as sodium bisulfite to neutralize the chlorine in the water. A simple treatment process would add excess reducing agent to the stream to insure a complete removal of the chlorine. However, these reducing agents are themselves undesirable. The excess reducing agent will consume dissolved oxygen, potentially affecting the aquatic life. The ideal process would add just enough reducing agent to remove the chlorine.

Process Control Strategy

Dechlorination of chlorinated water requires the detection of chlorine residuals. One strategy is to feed a dechlorinating agent such as sodium bisulfite, sulfur dioxide or other similar compound based on the desired effluent chlorine residual. This is a feed-back type control using the effluent chlorine residual to control the dechlorinating agent feed pump.

Another control strategy is to feed dechlorinating agent use the chlorine residual prior to dechlorinating feed combined with a process flow rate. This is a feed-forward type control strategy. The effluent to the process can be monitored to assure complete removal.


ChemScan has introduced a special product, the UV-2150/DC for this application. The analyzer can detect chlorine residual at a post disinfection sample point and detect chlorine and dechlorination chemical residuals at concentrations down to 0.01 ppm at post chlorine removal sample point.

Chlorine is detected using a modified idiometric approach with multiple wavelength detection of the iodide to iodine conversion, while dechlorination agent is detected by measuring an applied disinfectant residual compared to a baseline. Unlike other analyzers, the ChemScan system compensates for reagent deterioration by measuring a baseline during every analysis cycle.



ASA Analytics, 2325 Parklawn Drive, Suite I, Waukesha, WI 53186 PH 262-717-9500, FAX 262-717-9530

ASA Analytics is your source for Water Analyzers, Wastewater Analyzers, Analytical Instruments, Spectrophotometric; Titration; Analytical Instruments, Ultraviolet (UV); Analytical Instruments, Water/Wastewater; Chloramine sensor; Continuous Flow Analyzer; Groundwater Treatment, Monitoring Instrument; Instrumentation Toxicity; Instrumentation, BOD; Instrumentation, Chlorine Residual; Instrumentation, Chlorine Testing; Instrumentation, COD; Instrumentation, TOC, TOD; Instrumentation, Water Quality Monitoring; Monitoring Systems; Multiparameter Sensors; Respirometers; Security Sensors & Systems; Water Analysis Products

| Parameters| ChemScan | Accessories | Service | Parts | Search | Contact |

© ASA Analytics | All Rights Reserved |